Tips for saving energy
▯
Install the appliance in a dry, well ventilated room!
The appliance should not be installed in direct
sunlight or near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
▯
Select 560 mm cavity depth.
A smaller cavity depth will result in a higher
energy consumption.
▯
Allow warm food and drinks to cool down before
placing in the appliance.
▯
Thaw frozen food in the refrigerator compartment
and use the low temperature of the frozen food
to cool refrigerated food.
▯
Open the appliance as briefly as possible.
▯
Regularly defrost the freezer compartment to
remove the layer of frost!
A layer of hoarfrost will impair refrigeration of
the frozen food and increase power consumption.
▯
Ensure that the freezer compartment door has
been closed properly.
▯
To avoid increased power consumption,
occasionally clean the back of the appliance.
▯
The arrangement of the fittings does not affect
the energy rating of the appliance.
40
Operating noises
Quite normal noises
Droning
Motors are running (e.g. refrigerating units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing.
Clicking
Motor, switches or solenoid valves are switching on/
off.
Preventing noises
The appliance is not level
Please align the appliance with a spirit level. If
required, place something underneath.
Containers or storage areas wobble or stick
Please check the removable parts and re-insert them
correctly if required.
Bottles or receptacles are touching each other
Move the bottles or receptacles slightly away
from each other.