Niche Dimensions; Side By Side Installation; Saving Energy - Gaggenau RB 28 Notice D'utilisation

en-us
Installation and connection
Furniture door dimensions
Key
A Furniture door protrusion
B Lower edge of furniture door

Saving energy

If you follow the instructions below, your appliance will use less power.
Note: The arrangement of the fittings does not affect the energy consumption of the appliance.
Installing the appliance
Keep the appliance out of direct sunlight.
Install the appliance as far away as possible from heat-
ing elements, cooker and other heat sources:
1 1 / " (3 cm) to electric or gas cookers
4
11 13 / " (30 cm) to oil or solid fuel cookers
16
Select an installation location with a room temperature
of approx. 68°F (20°C).
Use a cavity depth of 22
9
CAUTION
Risk of burns!
Individual parts of the appliance become hot
during operation. Touching these parts may re-
sult in burns.
Do not cover or block the ventilation openings.
Ventilate the room daily.
8
3 / '' (56 cm).
64
The specified furniture door dimensions apply for a door
gap of 5 / " (4 mm).
32

Niche dimensions

Cavity depth
A cavity depth of 22
appliance. If the cavity depth is smaller – at least 21
(55 cm) – the energy consumption increases slightly.
Niche width
An inside niche width of at least 22
required for the appliance. Any deviations from this
requirement may cause problems when installing the
appliance.

Side by side installation

It is only possible to install appliances side by side with a
gap of at least 5.9" (15 cm).
The appliance needs to cool less frequently at low
ambient temperatures and therefore consumes less
power.
The air on the back panel of the appliance does not
warm up as intensely. The appliance consumes less
power if the warm air can escape.
3 / '' (56 cm) is recommended for the
64
3 / '' (56 cm) is
64
21 / ''
32