Residual Risks - Scheppach HS250L Traduction Des Instructions D'origine

9. Handle the tools used with care. It is best to store
these in their original packaging or special con-
tainers. Always wear protective gloves to improve
your grip and further reduce the risk of injury.
10. Before using any of the tools, ensure that all pro-
tective devices are correctly attached.
11. Before use, ensure that all of the tools used by
you fulil the technical requirements of this power
tool and are properly attached.
12. The saw blade supplied should only be used for
sawing wood and never for working metal.
Caution! - Laser radiation
Do not look into the beam
Laser class
Protect yourself and you environment from acci-
dents using suitable precautionary measures!
• Do not look directly into the laser beam with unpro-
tected eyes.
• Never look into the path of the beam.
• Never point the laser beam towards reflecting sur-
faces and persons or animals. Even a laser beam
with a low output can cause damage to the eyes.
• Caution - methods other than those specified here
can result in dangerous radiation exposure.
• Never open the laser module. Unexpected expo-
sure to the beam can occur.
• If the machine is not used for an extended period of
time, the batteries should be removed.
• The laser may not be replaced with a different type
of laser.
• Repairs of the laser may only be carried out by the
laser manufacturer or an authorised representative.
Safety Instructions for Handling Batteries
1. Attention: Risk of explosion with improper re-
placement of the batteries. Only replace the bat-
teries with batteries of the same or an equivalent
type. Observe the "Technical data".
2. Batteries must not be charged, reactivated by other
means, taken apart, thrown into fire or short circuited.
3. Avoid contact with the skin, eyes and mucous mem-
brane. In case of contact with battery acid, the af-
fected area must be rinsed immediately with plenty
of clean water. Seek medical advice immediately.
4. If batteries are swallowed or enter the body in
any other way, seek medical advice immediately.
Keep batteries away from children and animals.
5. Remove batteries from the battery compartment if
they are depleted, or if the circular table saw is out
of use for an extended period of time. This avoids
damage that may arise due to batteries leaking.
30 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
6. Never expose batteries to extreme conditions by
storing them on radiators or in direct sunlight for
example.
7. Clean the battery and device contacts if neces-
sary before insertion, with a little emery cloth for
example.
8. Ensure correct polarity during insertion.
9. Do not use old and new batteries of different
types together.

6. Residual Risks

This power tool has been constructed in accord-
ance with the latest technology and the general-
ly recognised safety regulations. Nevertheless,
it is possible that individual residual risks may
occur during operation.
• Electrical hazard if improper electrical connection
cables are used.
• In addition, concealed residual risks may be pres-
ent in spite of all the precautions that have been
taken.
• Residual risks can be minimised by observing the
„Safety instructions" and „Use in accordance with
the designated purpose", as well as the operating
instructions.
• Do not put any unnecessary stresses on the ma-
chine: excessive pressure during sawing will quick-
ly damage the saw blade. This may result in a re-
duction in the performance of the machine, as well
as a reduction in the cutting accuracy.
• Avoid switching the machine on by accident: when
inserting the plug into the socket, the power button
must not be pressed.
• Use the tool which is recommended in this manual.
This will ensure the optimal performance of your
saw.
• Keep your hands away from the working area when
the machine is in operation.
• Before you carry out any adjustments or servicing
work, turn the device off and remove the mains
plug.