Volume; Shutdown; About; Power Management - Tunturi Pure Cross F 8.1 Mode D'emploi

When pressing "Volume" button it opens
master volume settings window.
In here you can set the master volume
for web and media player volume in
range between 0 and 15(max).
Use arrow up or down buttons to adjust.
Press OK button to confirm, and go back
to setting menu.
Press Back button to go back to settings
menu without change.
When pressing "ShutDown" button it will
show a prompt message to confirm you
want to shut down the display.
Select "Yes" and window will shut down.
When select "No" you will return to
settings window.
When pressing "About" button it opens
about information window.

Volume

ShutDown

About

Owner's manual • Pure 8.1
In here you can see the currently
installed software information only.
Press Back button to go back to settings
menu.

Power Management

When pressing "Power Management"
button it opens power management
window.
In factory mode the display will shut in
standby mode after 10 minutes being
idle. In power management mode you
can suspend this by plus/ minus 5
minutes. Range 5/ 60 min.
Use arrow up or down buttons to adjust.
Press OK button to confirm, and go back
to setting menu.
Press Back button to go back to settings
menu without change.
Remark:
you also find a check box to Disable/
enable suspend. When suspend has
been disabled, the display will not shut
into standby mode.

Touch Calibrate

When pressing "Touch Calibrate" button
it start Touch Calibrate function
GB
25