Operation - BORETTI M-system MKRV-88 Notice D'emploi

Operation

Starting the refrigerator
After connecting to the power supply, turn the tempera-
ture controller clockwise from position 0 to any position
between 1 and 7 to start the refrigerator. The refrigera-
tor compressor will stop when the temperature control-
ler is at position 0.
Adjusting the temperature:
The temperature inside the refrigerator is adjusted by turning the temperature
controller. Positions 1 to 7 represent different temperatures from the lowest to the
highest.
Position
1-2 Summer or ambient temperature between25-35
3-4 Spring, autumn or ambient temperature between15-25
4-5 Winter, or ambient temperature between5-15
6-7 Quick freeze
Caution: Some time will be required for the refrigerator to reach the set level when
temperature adjustments are made. The length of this period is determined by
difference in the existing and set temperatures, the ambient temperature, the
frequency with which the door is opened and closed and the amount of food in
storage.
Caution: If ambient temperature is below 16
Controller".
Loading the refrigerator with food
When the refrigerator is switched on, do not load
food until 1~2 hours have passed. Usually, food
for cold storage or deep freezing can be loaded
when the temperature inside the compartment
reaches the set point.
Conditions
please turn on the "Low-temp
Temperature Controllor