BORETTI M-system MKRV-88 Notice D'emploi page 77

Cautions
*Connection and installation of the appliance are not to be carried out in strict compliance
with the relative instructions set forth in the Use's Guide.
*For the purpose of safety ,the appliance must be properiy grounded in accordance with
specifications.
*Always remember to unplug the appliance before cleaning.To disconnect the appliance,
pull at the plug itself not the cord.
*Keep alcoholic beverages in airtight bottles or containers and always store in an upright
position. In addition, do not store any explosive substances inside the appliance-Danger
of explosion!
*Do not damage any parts of the appliance that carry refrigerant by piercing or perforating
the refrigerant's grooves with sharp or pointed items,crushing or twisting any tubes, or
scraping the coatings off the surfaces. If the refrigerant spurts out and gets into eyes, it
may result in serious eye injuries.
*Do not obstruct or cover the ventilation grille of the appliance.
*Do not allow children to play with the appliance, In no case should children be allowed to
sit on the drawers or hang onto the door.
Should you have bought your new fridge / freezer to replace an old appliance, please
make sure that all existing latch-or bolt-locks on the old appliance are destroyed, before
you dispose of it.
This will ensure that a child cannot get trapped inside.
Please have the old appliance ecologically disposed of by a company specialised in
environmental protection, since the appliance may contain harmful components in the
refrigerant and this must be removed with special equipment.Please check with your
dealer or with your local authority.
Make sure that the refrigerating system containing the refrigerant,especially the heat
exchanger at the back of the appliance,is not damaged during transportation to the
disposal or collection site,so that you can be sure that the refrigerant does not leak out.
Details concerning the type of refrigerating/isolating agent used can be found on the
appliance's rating plate.
*Warning: Keep ventilation openings in the appliance enclosure or in the structure for
building in ,clear of obstruction.
*Warning: Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
*Warning: Do not damage the refrigerant circuit.
*Warning: Do not use electrical appliances inside the food storage of the appliance.
*It is necessary to have the plug accessibie after installation.
*If the supply cord is damaged, it must be replaced by a supplied cord or assembly available
from the manufacturer or its service agent.
*Connection of power supply and installation should be conducted in accordance with the
instructions in the operation manual.
*Only the tools regulated by the manufacturer can be used for defrosting.
Specifications
*This appliance is designed for food refrigeration, ice making and frozen food storage.
*It is intended strictly for household use. If using it for industrial or commercial purpose,
be sure to observe the relevant norms and regulations.
*The refrigerating circuit is leak-proof.