Cola Beauty Manuel D'installation, D'utilisation Et D'entretien page 49

2.7 Electrical connection
Connect one end of the power cable to the rear socket of the stove, and the other to the wall socket.
The voltage supplied by the system must match that specified on the stove dataplate and in the technical data
section of this manual.
During stove idle periods it is advisable to remove the power cable.
- Make sure the electrical system is equipped with an earth and differential switch in accordance with the
current Regulations.
- The power cable must never touch the stove exhaust pipe.
2.8 Wiring diagram
TSP = Main safety Thermostat
VSG= Main vacuum switch (Not detected by the card )
VTV= Venturi vacuum switch
2.9 Emergency
Suitable fire-prevention devices should be arranged for any eventuality.
In case of a fire, proceed as follows:
- Immediately disconnect the plug.
- Extinguish the fire using suitable fire-extinguishers.
- Call the fire department immediately.
- Do not use jets of waters to extinguish the fire.
Connection diagram
Room
probe
Fume extractor
Auger
49
Fume
probe
System 230V
BEAUTY – BEAUTY LUX