emerio MIS-122958.2 Mode D'emploi page 7

2. SPEED: Press "Speed" to adjust the speed: 1= low wind speed; 2= medium wind speed; 3= high wind speed.
3. MODE: Press "Mode" to choose the mode functions from Normal "
" " → ... (Repeating).
- Normal: The appliance works with the same wind speed all the time.
- Natural: Wind speed changes randomly with short time suspended.
- Sleeping: Wind speed changes generally from high to low with short time suspended.
4. TIMER: Press "Timer" to set your desired working time from 1h →2h →3h ... →9h →off. When the set time
has elapsed, the fan will be off and under standby condition.
5. SWING: Press "Swing" to control the oscillation function on or off.
6. MIST: Press "Mist" to control the mist function on or off. Mist function can also be operable separately under
standby mode.
7. After use, switch off the appliance and unplug it. Note: Refill the water tank when the icon "
red.
CLEANING AND MAINTENANCE
Clean and maintain the product in the following situations.
• After use
• Changing water
• Used again after long-term storage
1. Before cleaning, cut off the power, unplug the appliance and wait for the fan motor to completely stop
rotating.
2. Clean the dirt on the surface of the fan, which can be gently wiped off with a clean and soft cloth.
3. Please use a soft cloth or the narrow-slit suction nozzle of the vacuum cleaner to clean the dust on the
outside of the fan or fan blades.
4. Do not rinse directly with water.
5. Do not wipe with thinner, toluene, acid lotion and oil. Do not wipe the fan body with detergent to avoid
discoloration and deterioration.
6. For storage after cleaning, please wrap it with original packaging materials and store in a dry place.
7. If you do not use it for a long time, please completely drain the water inside the water tank and the water
tank seat. Place the water tank in a dry and well-ventilated place. After the whole machine is dry, you can
pack it for storage.
- 6 -
" → Natural " " → Sleeping
" flashes in