emerio MIS-122958.2 Mode D'emploi page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Please remove the water tank from the main body before cleaning and maintenance.
■ Cleaning and maintenance of water tank (daily)
If the water tank is dirty, please soak the water tank with a diluted neutral detergent of kitchen for 5-10 minutes.
After the dirt is dissolved, pour out the sewage and wipe dry. Please wash off the detergent carefully, otherwise
it may not work properly or cause detergent ingredients to be sprayed. Be sure to use the neutral detergent of
the kitchen. If chlorine-based, acid-based, and enzyme-based detergents remain inside the product, toxic gas
may be generated, which is very dangerous.
■ Cleaning and maintenance of the water tank seat (the place where the water tank is located) (daily)
1.
Use a dry cloth to soak up the remaining water in the water tank seat. If there is still have water, please
repeat the action of soak up.
2.
Please gently wipe the inside of the tank seat with a soft damp cloth dampened with a little detergent.
3.
Be sure to use the neutral detergent of the kitchen. If chlorine-based, acid-based, and enzyme-based
detergents remain inside the product, toxic gas may be generated, which is very dangerous.
4.
Please wipe the ultrasonic vibrator gently with cotton swab after dabbed with detergent. (Fig.1)
5.
Do not use too much force when cleaning, otherwise the product may be damaged or leak.
6.
Please clean the inside of the water tank seat carefully, wipe off the moisture with a soft cloth and dry it.
7.
Please wash off the detergent carefully, otherwise it may not work properly or cause detergent ingredients
to be sprayed.
Fig.1
- 7 -

Publicité

Table des Matières
loading

Table des Matières