Using Your Hob In All Simplicity - Brandt TV222 Série Guide D'utilisation Et D'installation

9962 5581.qxd 24/09/02
S
tart/Stop
A beep and a flashing 0
show that the zone
concerned has been
lighted.
You can then choose the
desired power.
If you do not set the
power, the cooking zone
will turn itself off
automatically.
S
etting manual power
Automatic-Stop
Automatic stop is a safety function for your hob.
It starts up automatically if ever you forget to
turn off your cooking.
Power consumed
Between 1....4
Between 5....7
Between 8....Max
The letter A is displayed for the heating zone
concerned and the hob will bleep for about 2 mi-
nutes. The A will continue to be displayed until
any control of the zone in question is touched.
The hob will then bleep twice to confirm your ac-
tion.
15:12 Page 7

Using your hob in all simplicity

C
Locked
0
Controls can be locked:
- Either when turned off (cleaning)
- Or during use (the operations in progress
continue and the settings displayed stay active).
However when in the locked position, the "STOP"
touch control has priority and cuts off the power
to the oven.The display turns off after a few
seconds. It can be reactivated by touching any
touch control.
Residual heat indicator
The heating zone
goes out
automatically after
8 hours The display shows
2 hours
After a prolonged power cut, a light display may
1 hour
appear. It will turn itself of after pressing any
key for a while. However, the temperature of the
cooking areas may remain high.
WARNING
7
hild safety
Unlocked
3 , 4 sec
H
H
.
Do not touch these areas, risk of burns.
3 , 4 sec