Setting The Timer; Using Your Hob In All Simplicity; Child Safety - Brandt TI302BS1 Guide D'utilisation Et D'installation

S
tart/Stop
0
A flashing 0 show that the zone concerned has
been turned on.
You can then choose the desired power.
If you do not set the power, the cooking zone
will turn itself off automatically.
S
etting manual power
S
etting the timer*
Operates when cooking zones concerned are
working. You can modify cooking times and
any time.
manual stopping
automatic stopping
To stop the beep touch any control key in the
cooking zone concerned. It will stop by default
after about 1 minute.

Using your hob in all simplicity

C
hild safety
Your cook top is equipped with a child safety
feature which locks it during the use:
- Either when stopped (for cleaning)
- Or during cooking (any operations underway will
continue and the displayed settings remain active).
this case, for safety reasons only the "STOP" button
is still usable.
Don't forget to unlock the appliance before
reusing it.
Locking the appliance
- Identify the special locking
buttons (- +) placed on top of a sym-
bol representing a padlock (or a key).
- Press simultaneously on these but-
tons (- +) until the following informa-
tion is displayed
The display goes out after a few seconds.
Pressing any of the buttons activates the display.
Unlocking the appliance
Press simultaneously on the locking buttons (- +)
duntil the display goes out.
0
0
9
or