Using Your Hob In All Simplicity - Brandt TI200 Guide D'utilisation Et D'installation

9962 5741.qxd 09/09/02
S
tart/Stop
A beep and a flashing 0 show that the zone
concerned has been lighted.
You can then choose the desired power.
If you do not set the power, the cooking zone
will turn itself off automatically.
S
etting manual power
The two zones located on the same side
have a total power of 2800 W, which is
divided up automatically between them.
This implies, for example, that using maximum
power in one zone will lead to the other zone's
power being reduced automatically which will be
shown on the power display.
The last instruction always has priority.
10:34 Page 9

Using your hob in all simplicity

S
etting the timer*
depending on the model
0
manual stopping
automatic stopping
To stop the beep press any control key in the
cooking zone concerned. It will stop by default after
about 1 minute.
*depending on the model
C
hild safety
Locked
Controls can be locked:
- Either when turned off (cleaning)
- Or during use (the operations in progress continue
and the settings displayed stay active).
However when in the locked position, the "STOP"
touch control has priority and cuts off the power to
the oven.The display turns off after a few seconds.
It can be reactivated by touching any touch control.
Unlocked
9
Operates when cooking zones concerned are
working. You can modify cooking times and
any time.
0
0
3 , 4 sec
3 , 4 sec