Wolf ICBCT15G Guide D'utilisation Et D'entretien page 19

W O L F T R O U B L E S H O OT I N G
T R O U B L E S H O OT I N G
P R O B L E M
Burner flame does not
burn evenly
Food boils or burns in
one area of the pan and
not the other
Burner fails to ignite
Burners extinguish them-
selves when using more
than one large roaster or
griddle simultaneously
Food boils out of the pan
and overflows into the
burner pan
Water does not come to
a boil fast enough
Food cooks too slowly
when sautéing
Simmer setting does not
maintain constant surface
bubbles
G U I D E
G U I D E
P O S S I B L E S O L U T I O N
Reposition the burner cap of the stacked sealed burner assembly
as described on page 13.
Placement of pan on the grate is not centered above the burner.
Pan material does not conduct heat evenly.
Base of pan is warped and does not rest flat on the grate or handle
of pan is too heavy and tips pan toward handle.
Countertop or cooktop cabinet is not level.
Ceramic igniter is damp from a spillover or spray cleaner. Allow
ceramic to dry out completely.
Burner head ports are blocked. Use a straightened, metal paper
clip to open the blockage.
If a GFCI circuit is used, check to see if it has been tripped.
Good gas combustion requires the correct amount of airflow to
maintain the flame. Using two oversize pans simultaneously
restricts air movement.
Heat setting is too high or pan size is too small for its contents.
Water temperature is colder than usual.
Cover pan for most efficient use of the
Diameter of pan is too large or base of pan is warped.
Too much food is added at one time; reduce amount of food and
sauté in batches.
Size of food pieces is too large or temperature of food is colder
than usual.
Pan does not conduct heat evenly.
Delicate foods may need a lower simmer setting so that scorching
does not occur.
setting.
19