Press the $/± button to exit the
■
menu at any time.
The following settings are available:
Settings
Language
Water hardness
Switch off after
Brightness display
Beverage info
Factory settings
Demo mode
Beverage settings
Espresso / Cof-
feetemperature
Hot water temper-
ature
Order coffee/milk
--------
Possible settings
Different languages
1 (soft)
■
2 (medium)
■
3 (hard)
■
4 (very hard)
■
15 minutes
up to
3 hours
Level 1 up to level 10
Standard setting 7
Shows the volume of drinks dispensed since the appliance was commissioned.
For technical reasons, the counter does not represent a precise number of cups.
Appliance reset to factory set-
tings
on
■
off
■
normal
■
high
■
max.
■
> 70 °C
■
> 80 °C
■
> 85 °C
■
> 90 °C
■
> 97 °C
■
first milk
■
first coffee
■
If no entry is made within approx. 2
■
minutes, the menu closes
automatically and the settings are
not saved.
Explanation
Setting the language to be used for display texts.
Setting in line with the hardness of the local
water supply.
The preset water hardness is level 4 (very hard).
The water hardness can, for example, be
requested from your local water supplier.
It is important to set the water hardness cor-
rectly, so that the appliance indicates accurately
when the descaling programme should be run.
Setting that governs how long the appliance
should wait after the last beverage preparation
before it automatically switches itself off.
The factory setting is 30 minutes.
Setting that governs the brightness of the dis-
play
Resets all your own settings to the condition
when delivered.
For presentation purposes only. The setting "off"
must be activated for normal operation. The set-
ting is only possible in the first 3 minutes after
switching on the appliance.
Setting the temperature for coffee drinks.
The setting is effective for all preparation types.
Setting the temperature for hot water.
The setting is effective for all preparation types.
Setting that governs whether milk or coffee
should be brewed and dispensed first. (Cappuc-
cino)
Menu settings en
21