Sinmag Europe SM 520S Mode D'emploi page 6

ENG
3.5. Protective safety grid
A. Raising:
• When you lift up the protective grid, the bar engages in the spring
B. Lowering:
• Take hold of the protective grid by the top bar and lower down.
3.6. Hand roller
The sheeted dough is wound up on the hand roller to remove dough for addi-
tional processing.
3.7. Winding sheeted dough
• Raise roller mounting into upright position.
• Place hand roller in the roller mountings.
• Operate machine in the direction of the arrow.
• Press the beginning of the dough strip onto the roller.
• Let the dough wind onto the roller.
• After winding, remove dough for further processing.
6
catch.
SINMAG EUROPE BVBA