ETNA KC130ZT Mode D'emploi page 31

USE
Press the timer key as many times as necessary, to select the cooking zone of which
▷
you want to set the timer.
4. Within 10 seconds select a cooking time with the '+' and '-' timer keys.
▷ The point from the relevant cooking zone next to the timer display is flashing.
5. The timer has been set.
The cooking zone will switch off after the set time has passed.
▷
▷ Don't select a cooking zone when the timer is used as a kitchen timer!
The timer alarm beeps after the set time has passed.
▷
Press the timer key to stop the alarm.
▷
Changing preset cooking time
Cooking time can be changed anytime during the operation.
1. Press the timer key as many times as necessary, to select the zone of which you want to
adjust the timer.
The zone is identified by a lighting point next to the timer display.
▷
2. Press the '+' or '-' keys to change the time.
Checking remaining cooking time
The timer display shows all timer settings. The different timer settings are shown clockwise in the
display in turn.
1. Press the timer key as many times as necessary, to select the zone of which you want to
see the remaining time.
The zone is identified by a lighting point next to the timer display.
▷
The timer will display the remaining time of the selected cooking zone.
▷
EN 13