Palazzetti ECOMONOBLOCCO WT 16:9 3D N12 Manuel D'installation, D'utilisation Et De Maintenance page 84

9.4.2 Description of the menu
Menu Function
°C
Temperature
Fan Ventilation
Info Information
Power Power
Door Door
84
Description
Display of the room temperature detected
Fan speed setting of the ambient air.
Screen 1
ET4W: identification name (customisable via App)
AP MODE: Wi-Fi operating mode
xx:xx:xx:xx:xx:xx: Mac Address identifier
Screen 2
connboxxxx: Wi-Fi network name (SSID)
192.168.10.1: IP address
signal -xx dBm: signal power (which is only viewable
with the panel connected to the modem)
proto DHCP: IP automatic assignment
Screen 3 (for version WT 16:9 3D V12)
T1: xx (°C): room temperature detected in the vicini-
ty of the display
T3: xx (°C): temperature combustion chamber
T4: xx (°C): temperature outlet air from the vents
Screen 3 (for version WT 16:9 3D V12 EPLUS)
T1: xx (°C): room temperature detected in the vicini-
ty of the display
T3: xx (°C): temperature combustion chamber
T4: xx (°C): temperature outlet air from the vents
S:0 P:4 F:3 D:3: diagnostic information
Screen 4
Remote: scanning..: enables scanning for any BLE
accessories
Screen 5
e.g. "Comb","Comb+Fan", etc...: product operation
variant
DISPLAY: 1.1.0: diagnostic information ":", firmware
display version
BOARD m001 v001: diagnostic information ":", pow-
erboard revision - firmware powerboard version
(for version WT 16:9 3D V12 EPLUS)
Setting the operating power
(for version WT 16:9 3D V12 EPLUS)
Opening and closing the door
Values
-
Off; 1..5; High; Auto
1..5
Close: door closed
Opening: door
opening
Open: door open
Closing: door
closing
STOP: door
stopped in an
undefined point
004778670 - 11/02/2021