Sinmag Europe SE10L Mode D'emploi page 6

ENG
5. MAINTENANCE
NOTE : ALL MAINTENANCE WORK SHOULD BE DONE ONLY
AFTER UNIT HAS BEEN DISCONNECTED FROM ELECTRICAL
POWER AND GROUNDING.
Never use a metal or stiff brush to clean the mixer. Never
!
clean the mixer with a water hose or any fluid pressure.
The mixer should be thoroughly cleaned after using.
!
Bowls and agitators should be removed from the mixer and cleaned.
!
The transmission case and planetary gears are filled special grease that
!
will last for several years. When grease is needed for replacement, it
should be ordered from our authorized service representative.
If the attachment strikes bowl, stop the mixer. The original seller will
!
help you to make adjustment.
If your mixer should malfunction or fail to operate, check the
following.
Is the mixer plugged in?
!
Is the fuse in the circuit to the mixer in working order? If you have a
!
circuit breaker box, be sure the circuit is closed.
! If the problem is not due to one of the above items, please contact your
original seller.
6
SINMAG EUROPE BVBA