Horizon Fitness T101 Manuel Du Propriétaire page 8

ASSEMBLY STEP 3
HArDWArE BAG 3 CONTENTS :
BOLT (B)
20 mm
Qty: 4
8
SPRING WASHER (C) FLAT WASHER (D)
15 mm 15 mm
Qty: 4 Qty: 4
RUNNING
DECK
CONSOLE CABLE RIGHT CONSOLE MAST
SPRING WASHERS (C)
BASE FRAME FLAT WASHERS (D)
Open hardware bag 3.
A
Pull lead wire through right console
B
mast. After pulling the lead wire through the
mast, the top of the console cable should
be located at the top of the mast. Detach and
discard the lead wire.
With the running deck in the raised
C
LEAD WIRE
position, attach the right console
mast to the base frame using 4 bolts
(b), 4 spring washers (c) and 4 flat
washers (d).
NOTE: Be careful not to pinch any wires
while assembling the right console mast.
BOLTS (B)