Publicité
Les langues disponibles
Les langues disponibles
12.
Optional addition of a DVT40M mobile
unit and/or a DVT40T door intercom
The door intercom has already been paired with channel 1 of the mobile
unit in the factory. A maximum of
more door intercom
can be connected to the existing system:
To establish a wireless connection between a DVT40T door intercom and
a DVT40M mobile unit, pair them as follows:
!
The door intercom and mobile unit must both have a power supply
and the mobile unit must be switched on.
!
Press any button [1/2/3/5/7/8] on the mobile unit to make the
start screen appear.
!
—
Press the left button
[3 - "Menu"] to open the menu.
!
Scroll through the menu with the
reach "Register" and press the left button
Channel no. 1 and no. 2 appear, the hash # indicates which
channel is currently selected.
!
Move the hash # to the channel you require by pressing [2]:
First mobile unit:
Channel no. 2 for second door intercom
Second mobile unit:
Channel no. 1 for second door intercom
Channel no. 2 for second door intercom
!
—
Press the left button
[3 - "
you now have approx. 20 seconds to complete pairing.
!
Press and hold the pairing button [28] on the door intercom until
you hear three short beeps on the intercom as confirmation that
pairing has been successful; the mobile unit then makes a "plop"
sound and the start screen appears again.
Information about operation following extension:
!
If there is a ring at one of two door intercoms, you can see at the top
left of the camera image where the ring has come from: door
intercom "1#" or "2#".
!
When there is a ring at one of the door intercoms, all of the paired
mobile units that are switched on respond as described in section 11.1.
!
If there is a ring at a door intercom and the conversation is accepted
on one of two paired mobile units, the camera image switches off
on the other mobile unit, the start screen appears on it and the
screen switches off after approx. 20 seconds.
13. Settings
13.1 Settings adjusted directly by the buttons on the
mobile unit
Volume of the ring tone on the mobile unit
!
Press any button [1/2/3/5/7/8] on the mobile unit to make the
start screen appear.
!
Pressing the
and
volume of the ring tone on the mobile unit.
Screen brightness
!
Press any button [1/2/3/5/7/8] on the mobile unit to make the
start screen appear.
!
Pressing the
and
brightness of the screen.
one more mobile unit and/or one
and [2] buttons until you
—
[3 - "Select"].
"]. The mobile unit beeps and
[2] buttons reduces or increases the
[2] buttons increases or reduces the
13.2 Menu settings
Scrolling through the menu
!
To open the menu, first press any button [1/2/3/5/7/8] on the
mobile unit to make the start screen appear, then press the left
—
button
[3 - "Menu"]. The menu items appear underneath
one another.
!
By pressing the
and [2] buttons, you can scroll between the
menu items and through the sub-menu of a menu item.
!
To select a menu or sub-menu item, press the left button
"Select"].
!
By pressing the
and
existing setting.
!
To return to the menu from a menu item or to close the menu, press
—
the right button
[7 - "Back"].
!
Approx. 15 seconds after a button is pressed, the menu closes
automatically.
VOLUME
of the ring tone / conversation / ring and camera display
duration on the mobile unit
Talking Volume
Setting for the loudspeaker volume on the
mobile unit (1 to 9 bars)
Factory setting: 6 bars
Ringtone Volume Setting for the ring tone volume on the
mobile unit (1 to 9 bars)
Factory setting: 6 bars
Ringing Time
Setting for
B
the duration of the ring tone on the mobile unit
between 0 and 30 seconds. A setting of 0
seconds means that the ring tone is switched off.
B the camera display duration
seconds. A setting between 1-14 seconds will
automatically set the duration to 15 seconds
Factory setting: 30seconds
BRIGHTNESS
of the screen
Setting the screen brightness (1 to 9 bars)
Factory setting: 3 bars
KEY TONE
Activation (ON) and deactivation (OFF) of the confirmation tone each
time a button is pressed
Factory setting: ON
RING TONE
Selection of the mobile unit ring tone (from 3 tunes)
Factory setting: Ring Tone 1
SNAP SET
- snapshot activation
Activation (ON) and deactivation (OFF) of automatic saving of a
snapshot when the ring button on the door intercom is pressed. The
snapshot is saved on the mobile unit.
Factory setting: ON
—
[3 -
[2] buttons, you can change the
between and 30
15
GB - 31
Publicité
