Use Of The Appliance - Pelgrim GVW5820NY Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

24
Multitab button
Press this button to activate or deactivate
the multitab function. Refer to 'Multitab
function'.
Delay start button
Press this button again and again to delay
the start of the washing programme of 3, 6
or 9 hours. The related indicator comes on.
Function buttons
With these buttons you can:
• Adjust electronically the level of the water
softener. Refer to 'Setting the water soft-
ener'.
• Cancel a washing programme in opera-
tion. Refer to 'Setting and starting a
washing programme'.
• Activate and deactivate the rinse aid dis-
penser (only with the multitab function
on). Refer to 'What to do if...'.
• Activate and deactivate the acoustic sig-
nals. Refer to 'Acoustic signals'.
Setting mode
The appliance must be in setting mode
for these operations:
• To set and start a washing programme.
• To set and start a delay start.
• To adjust electronically the level of the
water softener.
• To activate or deactivate the rinse aid
dispenser (only with the multitab function
on).
• To deactivate or activate the acoustic
signals.
Activate the appliance. The appliance
is in setting mode when:
• All the programme indicators are on.
Activate the appliance. The appliance
is not in setting mode when:
• Only one programme indicator is on.

Use of the appliance

1. Be sure that the set level of the water
softener agrees with the water hardness
in your area. If not, adjust the water
softener.
2. Fill the salt container with dishwasher
salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the appli-
ance.
• The delay start indicators are on.
– It is necessary to cancel the pro-
gramme or the delay start to go back
to the setting mode. Refer to 'Setting
and starting a washing programme'.
Acoustic signals
You can hear the acoustic signals in these
conditions:
• The washing programme is completed.
• The level of the water softener is adjusted
electronically.
• The appliance has a malfunction.
Factory setting: on.
Deactivating the acoustic signals
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. Press and hold function button (B) and
function button (C) at the same time un-
til the indicators of function buttons (A),
(B) and (C) flash.
3. Release function button (B) and function
button (C).
4. Press function button (C),
• The indicators of function buttons (A)
and (B) go off.
• The indicator of function button (C)
continues to flash.
• The end indicator comes on.
5. Press function button (C) again.
• The end indicator goes off. The
acoustic signals are deactivated.
6. Deactivate the appliance to confirm.
To activate the acoustic signals again, do
steps (1) through (4). Press function button
(C), the end indicator comes on and the
acoustic signals are active.
5. Set the correct washing programme for
the type of load and soil.
6. Fill the detergent dispenser with the cor-
rect quantity of detergent.
7. Start the washing programme.

Publicité

Table des Matières
loading

Table des Matières