Publicité
Les langues disponibles
Les langues disponibles
SET UP YOUR MOW ER
IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables.
1. Raise handles until lower handle section locks into place in mowing position.
2. Remove protective padding, raise upper handle section into place on lower
andle and tighten both handle knobs.
3.Remove handle padding holding operator presence control bar to upper
handle.
Push handle
Drive lever
Instruction for grass bag assembly
1. Put out the grass box and metal bracket from the packing box
2. Put the metal bracket into the grass box, keep the handle outside.
3. Fix the plastic jacket in the metal bracket.
OPERATION
Brake lever –must be held down to the handle to start the engine. Release to stop the engine.
Starter handle - used for starting engine.
Drive control lever - used to engage
Brake lever
The sensitivity of clutch lies on
tightness-scale of nut.
55
Publicité
