Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATION
INSTALL THE DUST COVER INTO HINGE ON THE UPPER CABINET.
-
SET THE TURNTABLE PLATTER ONTO THE CENTER SPINDLE.
-
ATTACH THE DRIVE BELT: POSITION THE BELT ON THE MOTOR PULLY, THE DRIVE BELT IS TIGHTENED
-
UNDER THE TURNTABLE PLATTER.
PLACE THE SLIP MAT ON THE TURNTABLE PLATTER.
-
INSERT THE HEADSHLL INTO THE FRONT END OF THE TONEARM, THEN SCREW THE LOCK NUT WITH
-
THE HEADSHELL FIRMLY HELD HORIZONTALLY.
INSTALL THE COUNTERWEIGHT
-
SLIDE COUNTERWEIGHT ONTO THE TONEARM. TWIST IT LIGHTLY AND IT WILL SCREW INWARDS
ONTO THE REAR END OF THE TONEARM. EVERY FULL TURN OF THE SCALE RING REPRESENTS
AROUND 2.4 GRAM (+/-0.4 GRAM).
8
Publicité
Table des Matières
