Télécharger Imprimer la page

LENCO LBT-190 Guide D'utilisation page 15

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 60
Starting Torque:
Braking System:
Starting Time:
Braking Time:
Time for Speed Change:
USB Function:
Computer interface:
Tonearm section:
Type:
Effective Arm Length:
Overhang:
Tracking Error Angle:
Tracking Force Adjustment Range:
Cartridge MM Type:
Stylus pressure:
Cartridge weight:
Anti-skating Range:
Channel Separation:
Channel Balance:
Pre-Amplifier
Output:
RIAA (Frequency Response):
Guarantee
Lenco offers service and warranty in accordance with the European law, which means that in case of
repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the
warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the
manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the
instruction, specifications and pictures in this documentation may differ slightly from your particular
situation. All items described in this guide for illustration purposes only and may not apply to particular
situation. No legal right or entitlements may be obtained from the description made in this manual.
N/A
Electronic brake
Less than 2 sec.
Less than 2 sec.
Less than 2 sec. from 33 to 45 rpm.
Less than 2 sec. from 33 to 45 rpm.
PC link (recording from turntable to computer by USB port)
USB 1.1 compliant 7/8/10 or MAC OSX
Static balanced S-shaped tone arm
200mm
10mm
Less than 3 degree
3-4g
Audio Technica AT-3600L
3.0±0.5g
2.5±0.5g
0~4g
More than 18 dB
Within 2.5dB at 1KHz
150mV +/-4dB (IN: 2.5mV 1KHz)
20Hz~20KHz +1/-3dB (IN: 1.5mV 1KHz)
15

Publicité

loading