LENCO LBT-190 Guide D'utilisation page 14

•
Set your USB turntable up to play the song or album you want to record.
•
Click on the red Record
button
•
Lower tone arm on USB turntable onto album and track you want to record.
•
Click on the blue Pause
button
•
Click on the yellow Stop button.
That's it. You can now play around with your recording and explore the editing capabilities of Audacity.
Remember that you can use the Undo function almost without limits while the project is open.
NOTE: CD's cannot be burned directly from the Audacity application. Other CD burning applications should
be used.
POWER SAVING FEATURE:
TO SAVE ENERGY, IF THERE IS NO AUDIO SIGNAL FROM TURNTABLE OR BLUETOOTH FOR A PERIOD OF
OVER AROUND 10 MINUTES, THEN THE UNIT WILL AUTOMATICALLY SWITCH TO OFF. IN ORDER TO
RESTART THE UNIT IF NECESSARY, PLEASE SWITCH OFF AND SWITCH ON THE UNIT AGAIN BY PRESSING
THE ON/STANDBY BUTTON AT THE BACK PANEL.
Specification
General
Model:
Dimensions:
Weight:
Power supply:
Power consumption:
Standard test condition:
Relative Humidity:
NOTE: Measurements can be carried out between 5 deg.C to 35 deg.C and 45% to 85% relative humidity.
Turntable Section:
Type:
Motor:
Driving Method:
Turntable Platter:
Speeds:
Wow and Flutter:
S/N Ratio:
Pitch Controls:
to beto begin recording.
to pause the recording. Press it again to continue.
LBT-190
450(W) x 355(D) x 130(H)mm
4.5Kg
AC ADAPTER 100V-240V 50/60Hz 0.65A
3W
Ambient Temperature: 20 +/- 2 deg.C
65% +/- 5%
2-speed full manual
Miniature permanent magnet DC brushes
Belt drive
332mm (Aluminum)
33 and 45rpm
Less than 0.3% WRMS (JIS WTD) with 33 rpm
More than 50dB (DIN-B)
+/- 10%
14