LENCO LBT-190 Guide D'utilisation page 7

TURNTABLE PLATTER
1)
CENTER SPINDLE
2)
HEADSHELL
3)
RETURN SWITCH
4)
PITCH CONTROL KNOB
5)
PLAY/STOP SWITCH
6)
33RPM / 45RPM SPEED SELECTOR
7)
TONE ARM
8)
BT PAIRING BUTTON
9)
BT PAIRING INDICATOR
10)
LIFT LEVER
11)
ANTI SKATE KNOB
12)
WEIGHT COUNTER
13)
STROBE LIGHT
14)
PHONO / LINE SELECTOR
15)
RCA LINE-OUT SOCKET
16)
USB PORT
17)
EXTERNAL POWER ADATOR JACK
18)
ON/STANDBY BUTTON
19)
GROUND TERMIAL
20)
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
WARNING:
THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED
-
WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
THE MAINS PLUGS OR AN APPLIANCE COUPLER IS USED AS THE DISCONNECT DEVICE, AND THE
-
DISCONNECT DEVICE SHALL REMAIN READILY OPERABLE.
PRECAUTIONS FOR USE
INSTALLATION
●
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
●
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
ALL OTHER CONNECTIONS HAVE BEEN MADE.
●
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
CONNECTION
1. CONNECT THE EXTERNAL POWER ADAPTOR WITH EXTERNAL POWER ADAPTOR SOCKET.
2. PLUG THE EXTERNAL POWER ADAPTOR INTO A SUITABLE MAINS SOCKET
3. PUSH IN THE ON/STANDBY BUTTON ON THE BACK PANELTO SWTICH ON THE UNIT FROM STANDBY
MODE.
7