LENCO LBT-190 Guide D'utilisation page 10

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 60
PICKUP SELECTOR
LINE / PHONO SELECTOR IS LOCATED AT THE BACK PANEL.
-
SELECT "PHONO", AUDIO SIGNAL WILL BY PASS INTERNAL PRE-AMPLIFIER WITHOUT ANY
-
PROCESSOR. THEN TURNTABLE HAS TO BE CONNECTED WITH EXTERNAL PRE-AMPLIFIER OR PHONO
CONNECTOR OF AN AMPLIFIER IF AVAILABLE FOR MUSIC PLAYBACK.
-
SELECT "LINE", AUDIO SIGNAL WILL BE PROCESSED BY INTERNAL PRE-AMPLIFIER. TURNTABLE CAN
BE DIRECTLY CONNECTED WITH AN ACTIVE SPEAKER OR LINE IN CONNECTOR OF AN AMPLIFIER FOR
MUSIC PLAYBACK.
REMOVE THE STYLUS PROTECTOR.
-
BE SURE THAT THE TONE ARM IS BEING DETACHED FROM THE TONE ARM REST PART BEFORE
-
OPERATING AND RE-SECURED AGAIN AFTERWARDS.
PUSH THE LIFT LEVER UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK, AND THEN SLOWLY
-
MOVE IT TO THE RECORD SIDE. THE PLATTER WILL START TO ROTATE.
PUT DOWN THE LIFT LEVER TO DROP THE TONE ARM AND TOUCH THE RECORD GENTLY. PHONO
-
PLAYING STARTS NOW.
PUSH THE LIFT LEVER UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK, NOW PLATTER WILL
-
STILL BE ROTATING BUT PHONO PLAYING WILL STOP. TO CONTINUE THE PLAYING, THE USER NEEDS
TO PUT DOWN THE LIFT LEVER.
TURN SPEED SELECTOR TO 33RPM OR 45RPM, DEPENDING ON THE RECORD TO BE PLAYED.
-
TURN START / STOP SWTICH TO STOP TURNTABLE FROM ROTATING OR RESUME TO WORK.
-
STROB DOTS ON THE TURNTABLE PLATTER FOR SPEED CHECKING. UPPER ROWS OF BIGGER DOTS
-
FOR 33RPM, UPPER ROWS OF SMALLER DOTS FOR 45RPM. ADJUST SPEED BY PITCH CONTROL
SLIDER (+/-10%) IF NECESSARY. SUITABLE DOTS WILL KEEP STABLIZED UNDER STROB LIGHT IF THE
SPEED IS CORRECT.
USE THE 45 RPM ADAPTOR IF REQUIRED.
-
AT THE END OF RECORD, THE PLATTER WILL AUTOMATICALLY STOP ROTATING, TONE ARM WILL
-
AUTOMATICALLY RETURN TO THE TONE ARM REST PART.
TRIGGER THE RETURN SWITCH DURING RECORD PLAYING, TURNTABLE WILL STOP GENTLY AND
-
TONE ARM WILL UTOMATICALLY RETURN TO THE TONE ARM REST PART.
SINCE THERE ARE NUMEROUS VINYL MAUFACTURERS, WE DO NOT GUARANTEE AUTO RETURN
-
FUNCTION IS APPLICABLE ON ALL VINYL. IF THE TONEARM CANNOT RETURN AUTOMATICALLY,
PLEASE TRIGGER THE RETURN SWITCH TO ACTIVATE AUTO RETURN
10

Publicité

Table des Matières
loading

Table des Matières