Setting The Volume Of Individual Parts Or Sections; V-Link Function - Roland KR103 Mode D'emploi

KR103 Digital Intelligent Piano
Performance functions and effects
Setting the volume of individual
parts or sections
The KR103 provides a number of functions that allow
you to set the level of several parts individually so as
to obtain an even more satisfactory balance.
Use these functions if you feel that one part is too
prominent (or too soft) with respect to the remaining
parts.
(1) Press the [Part¥Balance] button.
Volume
The display now looks more or less as follows.
UpperVol
(2) Use the [√][®] buttons to select the part (or section)
whose volume you want to change:
UpperVol Upper part.
LayerVol Layer part.
LowerVol Lower part.
ADrumVol Drum accompaniment of the selected
Music Style.
AbassVol Bass line of the selected Music Style.
Accomp Melodic accompaniment parts of the
selected Music Style. Though there are six
such parts, not all of them are used all the
time.
(3) Use [+][–] to set the desired volume (0~127).
Remember that you can hold down [+] or [–] (and
even [+] while pressing [–], and vice versa) to change
the volume more quickly.
(4) Press the [Exit] button to leave this function.
Note: This setting can be saved to a User Program (see p. 46).
42
Function Part Balance Transpose Reverb
Demo
Brilliance Balance
User Program
Accomp Keyboard
120
=

V-LINK function

V-LINK ( ) is a function that provides for
the integration of music and visual material. By using
V-LINK-compatible video devices (i.e. an Edirol
DV-7PR), visual effects can be easily linked to and
made part of the expressive elements of a perfor-
mance.
By using the KR103 with an Edirol DV-7PR, you can use
the KR103's keyboard (highest octave) to switch images
(clips). Press and hold a key for longer transition
("fade"). Briefly press a key for fast transitions.
The V-Link signals are transmitted via MIDI OUT.
(1) Connect the KR103's MIDI OUT socket to the MIDI
IN socket of the external video processor (or to a
UM-1 interface).
Out
MIDI
MIDI OUT
Edirol UM-1
REMOTE
Edirol DV-7PR
Projector Monitor
(2) Press the [Function] button (its indicator must
light).
Function
Volume Brilliance
(3) Use the [√][®] buttons to select the following
parameter:
V-LINK
(4) Use [+][–] to select "On" to switch on V-LINK con-
trol.
(The keys in the highest octave now act as controllers
and no longer play notes.)
Stereo
In R L (Mono)
Input
Part Balance Transpose Reverb
Demo
Balance
User Program
Accomp Keyboard
120
=