ProKlima FAN-103896.1 Mode D'emploi page 44

PARTS DESCRIPTION
1. Front guard
2. Blade
3. Rear guard
4. Rear shell
5. Oscillation button
6. Speed switch
7. Standing base
8. Tilt adjustment knob
OPERATING INSTRUCTIONS
1. Plug the power cord into a suitable socket.
2. Oscillation: To make the fan head oscillate, push down the oscillation knob. To stop the fan head from
oscillating, pull up the oscillation knob.
3. Tilting Angle: you can adjust the fan to the preferred elevation by the tilt adjustment knob. Tighten the knob
after the adjustment of tilt angle.
4. The fan is switched on by using the speed control switch on the rear shell (near the oscillation button), i.e.
0: Off, 1 = low speed, 2 = medium speed, 3 = high speed.
CLEANING
1. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable
from the socket.
2. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down
with a damp cloth and dry it carefully. Always take out the mains plug first.
3. Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it occasionally
using a dry brush or vacuum cleaner.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption:
Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other household wastes. To
prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
- 43 -
45W
FAN-103896.1 / FAN-103896.2