Keypad - Multiplex Cockpit SX 7 Mode D'emploi

11. Keypad

The Cockpit features two different keypads. In addition to the
standard keypad (with letters) there is a pure numeric keypad
which is automatically superimposed.

12. Telemetry
With the COCKPIT SX, you can make use of the advantages
of telemetry. A prerequisite for this is the use of a teleme-
try-capable M-LINK 2.4 GHz receiver and if necessary the
corresponding sensors.
12.1. WINGSTABI
The COCKPIT SX supports (from version 1.20) the output of
the WINGSTABI - telemetry.
The following values can be outputted:
· Status messages such as flight mode or flight phase
· Display of sensitivity for aileron - elevator - rudder
· Display of the receiver voltage
First, activate the telemetry transmission for "COCKPIT" in the
WINGSTABI using the MULTIPLEX launcher in the transmitter
settings. Assign the desired telemetry values to the addresses.
36
Special feature:
If flight phases are active, an additional Enter button is super-
imposed in the centre of the screen; this can be used to adopt
your preferred value for the current flight phase. In contrast,
the normal Enter button (right) is used to adopt the value for all
flight phases simultaneously.
The speech output of the telemetry values is integrated into
the transmitter. It receives the telemetry data from the model
completely independently of the transmitter and announces
the values as a speech output along with vario sounds and
warning signals.
Next, you can select the addresses which are to be displayed
or announced in the telemetry menu of the COCKPIT SX.
The announcement of the WINGSTABI status messages always
has priority.