Support; Fitting The Rear Handrail - Seca 645 Mode D'emploi

Fitting the rear handrail

You need the following connecting elements for this

support

assembly step:
3 x hex socket head
screws, M 5 x 12
1. Hold the rear handrail support in position on the
weighing platform as shown in the diagram above.
2. Attach the rear handrail support to the weighing
platform with two hex socket head screws.
3. Attach the triangular brace to the weighing platform
with one hex socket head screw.
4. Join the two handrail supports using a pan-head
tapping screw as shown in the diagram above.
1 x pan-head tapping
screw 6.3 x 38
Before you really get started... • 77
English