Menu Settings - Siemens TE 803 Série Mode D'emploi

Masquer les pouces Voir aussi pour TE 803 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
en

Menu settings

j
● Hold down the
3 seconds.
The different setting options are now
displayed.
Settings
Coffee temp.
Hot water temp.
Exit profile
The different setting options can be selected
with the selection buttons
Note: The changes you have made are
saved automatically. It is not necessary
to confirm them additionally. If no entry is
made after approx. 2 minutes, the menu will
close automatically.
The following settings can be selected:
Language
● Turn the rotary knob 6 to select the
required language.
Coffee temp.
● Turn the rotary knob 6 to set the coffee
temperature. The setting applies to all
types of preparation, except the custom-
ised settings under "Customising".
Hot water temp.
● Turn the rotary knob 6 to set the tem-
perature. The setting applies to all types
of preparation except the customised
settings under "Customising".
Exit profile
● Here you can set whether the appliance
should exit the customising function
automatically
automatic
.
manually
12
TE803_806_1RW.indb 12
button 7 for at least
<85°C
<
>
and
4.
or manually
Auto off after
● Turn the rotary knob 6 to enter the time
span after which the appliance should
automatically switch off following the last
drink preparation.
A time between 5 minutes and 8 hours can
be set.
(only TE806)
Cup warm. off in
Here you can set the time span after which
the cup warmer 27 switches off again
automatically.
● Set the required time by turning the rotary
knob 6.
Contrast
The display 5 contrast can be set from
to
. The factory setting is
+10
● Turn the rotary knob 6 to select the
required setting.
Water hardness
● Turn the rotary knob 6 to select the
required water hardness
Info: It is important to set the water hard-
ness correctly, so that the appliance indi-
cates accurately when the descaling pro-
gramme should be run. The factory setting
for the water hardness is
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
● Dip the test strip briefly in water and
check the result after one minute.
Level Water hardness
German (°dH) French (°fH)
1
1-7
2
8-14
3
15-21
4
22-30
–10
.
+0
or
.
1, 2, 3
4
4
.
1-13
14-25
26-38
39-54
08.05.2013 14:24:09

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Te 806 sérieTe803209rwTe806201rw

Table des Matières