Siemens TE 803 Série Mode D'emploi page 11

Display
The display 5 uses symbols to indicate
the selection options, coffee strength and
per-cup quantity, and uses text to indicate
settings, ongoing processes and messages.
The rotary knob 6 and selection buttons
4 can be used to change settings. The
selected setting is highlighted by a frame.
Espresso
 à À Á Å Æ
Example:
The status line 5a shows the name of the
type of drink, along with the strength setting
55
and per-cup quantity
The selection line 5b shows symbols for
drink selection.
The arrows in the navigation line 5c indicate
the direction in which more menu levels can
be found.
Please refer to "Displays" for more detailed
information.
Start button
Press the start button 8 to begin drink prep-
aration or to start a service programme.
Press the start button 8 again during drink
preparation to stop the dispensing process
prematurely.
TE803_806_1RW.indb 7
j
Use the
(press briefly) and adjust settings (hold
down for at least 3 seconds).
Displaying information
The following information can be displayed
in the Info menu:
● when should the next service be
ËË Í
5a
● how many drinks have been dispensed
5b
5c
● Press the
.
Î
* appears only if the filter is activated.
Press the
drink selection. If no button is pressed for
about 10 seconds, the appliance automati-
cally switches back to drink selection mode.
Adjusting settings
See "Menu settings".
button and settings
j
button 7 to display information
completed.
since the espresso machine was
switched on.
j
button 7 briefly and navigate
< >
with the and buttons 4.
Info
Descale after.
Clean after
Change filter in
Info
No. of coffees
No. of milk mixes
Amount hot water
j
button 7 briefly to return to the
en
200 À
À
200
*
200 À
11
15
2l
7
08.05.2013 14:24:09