BWT Magnesium Mineralizer Mode D'emploi page 25

1
2a
2b
3a
3b
4a
4b
Putting into operation:
1
Press the push button for 5 seconds. The indication then
automatically adjusts to „0" and the „Easy-Control" is now
ready for operation.
2 Counting function:
Each filling of the BWT water filtering system is counted by
means of the „Easy-Control".
3
Filter cartridge change:
The display starts flashing if either the maximum number of
fillings or the maximum period of use is exceeded
(depending on what happens first). Now a change of the
filter cartridge is necessary. After inserting the cartridge,
please keep the push button pressed for 5 seconds. The coun-
ter then automatically adjusts to „0".
Safety function:
4
In order to guarantee correct counting, the „Easy-Control",
after each filling, gives a counting pause of 15 seconds.
Even if during these 15 seconds the „Easy-Fill" is opened
several times, recording of the fillings will not change and
remains correct.
EN
25