SMA SUNNY HIGHPOWER PEAK1 Instructions D'installation page 42

5 Technical Data
Parameter
Integrable DC surge arrester /
AC surge arrester
Efficiency
Max. efficiency
EU efficiency
MPPT efficiency, static
Enclosure
Dimensions (W / H / D)
Weight
Acoustic noise level
Table 5.1 Specifications
1)
at nominal grid voltage
2)
at nominal grid voltage, Cos(phi) = 1.
Parameter
Protection class (according to
IEC 62109-1)
Electrical
Electrical safety
Functional
Functional Safety
Islanding detection - grid failure
1)
RCD compatibility
Table 5.2 Safety specifications
1)
depending on local regulations
42 SHP75-10-STP60-10-IA-xx-18
SHP 75-10
Type II / type II + III (combined)
98.8%
98.2%
99.9%
740 × 570 × 306 mm
77 kg
58 dB(A) (typical)
SHP 75-10
I
• IEC 62109-1/IEC 62109-2
(Class I, grounded –
Communication part Class II, PELV)
• Voltage and frequency monitoring
• Monitoring of DC current share in
AC current
• Insulation resistance monitoring
• FI monitoring
• Active Frequency Shift
• Disconnection
• Three-phase monitoring
• ROCOF/SFS
Type B, 1000 mA
SMA Solar Technology AG
STP 60-10
Type II / type II + III (combined)
98.8%
98.3%
99.9%
740 × 570 × 306 mm
75 kg
58 dB(A) (typical)
STP 60-10
I
• IEC 62109-1/IEC 62109-2
(Class I, grounded –
Communication part Class II, PELV)
• Voltage and frequency monitoring
• Monitoring of DC current share in
AC current
• Insulation resistance monitoring
• FI monitoring
• Active Frequency Shift
• Disconnection
• Three-phase monitoring
• ROCOF/SFS
Type B, 600 mA
Installation Guide