Home Connect Settings - NEFF T16TS7KN Série Notice D'utilisation

Touch the symbol repeatedly until the
U
3.
setting appears.
‹ will be lit on the hotplate display.
Set the value to using the twist knob.
ƒ
4.
and the symbol will flash on the hotplate
ƒ D
display.
Use the SSID "Home Connect" and the key "Home
5.
Connect" to log your mobile device into the hob
network.
Once the D symbol stops flashing and remains lit
continuously on the hotplate display, the hob is
connected to your home network.
The appliance will automatically try to connect to the
app; the setting will appear. The value
•'ƒ
flash in the settings area.
•'‚
Launch the app on your mobile device and follow the
6.
instructions for manually logging into your network.
Once the value
login process is complete.

Home Connect settings

You can adjust Home Connect to suit your
requirements at any time.
In the basic settings for your hob, navigate to the Home
Connect settings to display network and appliance
information.
Symbol
•'‚
‹
‚
ƒ
„
•'ƒ
‹
‚
•'„
‹
‚
•'...
‹
‚
•'†
‚
ƒ
•'‡
‹
will
‚
‚
•'ˆ
‹
‚
ƒ
* Basic setting
‹ appears on the hotplate display, the
Function
Registration in the home network (WLAN)
Not connected /disconnect network.
Connect automatically.
Connect manually.
Connected.
Connection to app
Not connected.
Connect.
Connect to WLAN
Radio module switched off.
Radio module switched on.
Settings via app
Switched off.
Switched on.*
Software update
Update available and ready for installation.
Starting installation.
Remote access by Customer Service
Not permitted.
Permitted.
WLAN signal strength
Not connected to home network (WLAN).
Signal strength 1 (poor)
Signal strength 2 (moderate)
Home Connect
en
63