GB
10. Insert the individual flat plugs into the fuse holder and install yellow securing clips. Connect to the
power outlet socket with the adapter lead piece.
11.
Plug in the fuse (10A) into the fuse holder and place cover onto the fuse holder.
12. Secure the placed wires and fuse holder with cable binders.
13. The single brown/white lead is the switch off connection for the parking aid. In vehicles without
parking aid the connection is missing, in vehicles with parking aid please consult your specialist
garage.
Re-install removed parts, re-connect the battery's negative terminal.
Check all functions with a suitable testing instrument (with load resistance) or with a towed vehicle!
Allocation of the 7-pin socket
Circuit
Left turn signal lamp
Rear fog lamp
Earth (circuit 1-8)
Right turn signal lamp
Right tail light
Stop light
Left tail light
Allocation of the 13-pin socket
Circuit
Left turn signal lamp
Rear fog lamp
Earth (circuit 1-8)
Right turn signal lamp
Right tail light
Stop light
Left tail light
Back light
Continuous positive
Charge line
Not assigned
Not assigned
Earth (circuit 9-12)
In the 13-pin electrical set the non-assigned 3-pin socket is for the adaptation of a separate
continuous positive power line set. This can, if desired, be obtained from a Westfalia dealer under
the parts no. 300 025 300 113. For connecting the charge line please consult your contracted
garage.
22
Wire
black/white
white
brown/white
black/green
gray/red
black/red
gray/black
Wire
black/white
white
brown/white
black/green
gray/red
black/red
gray/black
green
red
yellow
--
--
brown
Contact
1/L
2/54g
3/31
4/R
5/58R
6/54
7/58L
Contact
1
2
3
4
5
6
7
8
9
10
11
12
13