Data Transfer Via Infrared Interface; Clear/Display Saved Measurement Values; Display Of The Total Amount Of Measurement Values; Delete The Last Value Saved - Amprobe Telaris Série Mode D'emploi

Data Transfer via Infrared Interface

It is possible to realise the data transfer (or data filing) of all measurement data saved to the
PC via infrared interface. The respective "Report-Studio" software is required together with
the interface adapter (Order No. 1203).
The data transfer procedure is quite easy, please proceed as follows:
1) Connect interface adapter to the ISO-PRO.
2) Connect the adapter cable via 9pole-D-Sub-Plug (RS232) to the PC (e.g. Com2).
3) Open "Report-Studio" (please refer to the "Report-Studio" instruction manual).
4) Select menu point "Read-in data" or click with the mouse the button "read files from
measurement instrument".
The message "send data" appears on the PC screen.
5) Press the "Send" key (22).
The data transfer is started. After a few seconds, all memorised data is available on the PC
for further processing.
For further information, please refer to the "Report-Studio" instruction manual.

Clear/Display saved Measurement Values

It is possible to delete individual data or all data by means of the "Clear" key (25).
Furthermore, it is possible to display the total amount of all measurement values on the
screen.:

Display of the Total Amount of Measurement Values:

1) Set measurement function selection dial (19) to one of the 7 measurement functions.
2) Briefly press the "Clear" key (25). An acoustic signal is audible.
3) The number of all saved measurement values is briefly displayed.

Delete the Last Value Saved:

1) Set measurement function selection dial (19) to one of the 7 measurement function.
2) Briefly press the "Clear" key (25).
3) An acoustic signal is audible and the amount of measurement values saved is
displayed.
4) Press again briefly the "Clear" key (25) until the number of saved measurement values
displayed is reduced by 1 and a further acoustic signal is audible.
• Now release the Clear key (25) to prevent the total memory from being cleared.
• Clearing of the last value saved can be repeated as often as desired as long as data is still
contained within the memory.
20