Publicité
Les langues disponibles
Les langues disponibles
Install the device on a plane surface and block the rolls with the brakes.
Install an appropriate fog machine behind the fog cooler and position the fog machine's output nozzle in a
way that the distance between nozzle and fog insput is a maximum of 6 inches.
In the second example, a fog conducting hose (FT-10) is attached to a fog machine's output nozzle via an
adapter (FTA-1 or FTA-2) and then connected to an adapter (FTA-10) attached to the fog cooler's intake.
The floor fog exits the fog cooler via the fog output on the front panel.
If you wish to distribute the floor fog via the smoke-tubes, install the tube adapter and connect the smoke-
tubes.
OPERATION
Switch the fog cooler and the fog machine on using the power switch.
Waiting time for cooling is approximately two minutes.
Control the fog machine via your remote-control. The fog blown into the fog cooler will automatically be
cooled down and covers the floor of the room.
During operation, if you experience mechanical noise or no output, unplug immediately. Check power
connections and fog machine operation. Wait three minutes and then plug the unit in again. After plugging
the unit in and turning it on, wait for two minutes. If the problem persists, discontinue operation and return the
machine to your ANTARI dealer.
Clean the condensation water container regularly to avoid overflowing.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by authorized dealers only in
order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Starting current:
Cooling fluid:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 11/00 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
230 V AC, 50 Hz ~
750 W
4000 W
R404A Polyolester
790 x 610 x 490 mm
72 kg
14
Publicité
