Adjusting The Arm Support - Vermeiren V300 Mode D'emploi

EN
3.7

Adjusting the arm support

The arm support of your wheelchair can be adjustable in height and depth. The height of the
arm support can be adjusted in 3 positions.
Height armsupport to seat Number of the blocks
220 mm (8.66 in.) (Standard)
230 mm (9.06 in.)
240 mm (9.45 in.)
The depth of the armrest can be adjusted in 3 positions.
Depth of the armrest
Middle position (Standard)
Adjust the height and the depth of the armrest as follow:
1. Remove both screws under the armrest.
2. Place the correct number of blocks under and above the tubes, see table 4.
3. Install the armrest with the required holes for depth adjustment.
Table 4: Height of arm support
Front position
Back position
under the tube
2
1
0
Used holes
Back and middle
Hole 2 and 4
Front and middle
Table 5: Depth of armrest
Page 22
Number of blocks between
tube and armrests
1
2
3
V300
2010-11