Using The Armband; Using The Lanyard - Advanced Bionics NEPTUNE Mode D'emploi

Using the Armband

The armband is intended to attach to your upper arm, typically on the same side as
your implant. The Neptune processor can be placed on the armband with or without
the Neptune Connect. However, the Neptune Connect should always be removed
prior to exposure to water.
To use the armband:
1.
Ensure the headpiece cable is attached to the sound processor on one end and
the appropriate headpiece on the other end.
2.
Attach the sound processor to the armband using your preferred retention device
(i.e., clip or pouch).
3.
Secure the armband to your upper arm using the VELCRO® brand fasteners. For
further instructions on how to secure the armband, refer to the 'Instructions for
Use' included with the product.

Using the Lanyard

The lanyard is intended to be worn around your neck with the sound processor in the
pouch in the front of your body. The sound processor can be placed on the lanyard
with or without the Neptune Connect. However, the Neptune Connect should always
be removed prior to exposure to water.
User Guide for the Neptune™ Sound Processor 13