Advanced Bionics NEPTUNE Mode D'emploi page 24

To attach the Neptune Connect:
1.
Remove your Neptune Color Cover.
2.
Align the circle on the top of the Neptune sound processor with the corresponding
marking on the underside of the Neptune Connect for correct orientation.
3.
Push the Neptune Connect snugly onto the sound processor.
To remove the Neptune Connect:
1.
Hold the sound processor in one hand.
2.
Press the release latch located on the end of the Neptune Connect until you feel it
disconnect from the sound processor. Store in a safe place, such as your Neptune
Connect Wallet or Neptune Carrying Case, when not in use.
3.
Attach your Neptune Color Cover whenever the Neptune Connect is not in place
on the sound processor.
For additional information, refer to the Neptune Connect 'Instructions for Use.' For
instructions regarding attaching or removing your Neptune Color Cover, refer to the
'Color Customization' section of the User Guide.
24 User Guide for the Neptune™ Sound Processor
Align here
Release Latch