Troubleshooting
Risk of injuries or material damage
In case of doubt always take your mower to a specialist workshop.
Before any inspection or any work on the mower blade, switch the lawnmower o , withdraw the
safety key and remove the power pack.
Problem
Uneven running, severe
vibration of the lawnmower.
Red LED ashes slowly
Red LED ashes quickly
Poor mowing/grass collec-
tion performance.
Warranty
The warranty conditions of our local company or
importer apply in all countries. Under the terms of
the warranty we will repair faults on your device
free of charge, insofar as material or manufactur-
ing defects are the cause. To make a claim under
warranty please contact your seller or your nearest
branch.
EC Declaration of Conformity
urther details about the lawnmower are
contained on the separatel enclosed
E Declaration of onformit , which forms
part of this instruction manual.
Troubleshooting
Possible cause
The mower blade is damaged.
The mower blade has come loose from its
attachment.
Power pack temperature too high or too
low
Lawnmower temperature too high (elec-
tronic equipment).
Overcurrent release
Release due to low or high voltage
Motor sluggish or blocked
The mower blade is blunt.
The grass collector is clogged.
The cutting height is not adjusted.
WARNING!
Remedy
Consult a specialist workshop.
Allow the power pack to cool down or
warm up.
Allow the lawnmower to cool.
If this occurs again take your device to a
specialist workshop.
Charge the power pack.
If this occurs again take your device to a
specialist workshop.
Check that the mower blade moves
freely.
Consult a specialist workshop.
Follow the instructions in the section
"Adjusting the cutting height .
Follow the instructions in the section
"Adjusting the cutting height .
Environmentally-friendly disposal
Power tools, accessories and packaging must be
routed to an environmentally sound recycling chain.
Power packs:
Do not dispose of power packs/batteries
in domestic waste, by burning or throwing
into water. Power packs/batteries must be
collected, recycled or disposed of in an
environmentally-friendly manner.
Power tools:
Do not throw your old power tool away with the
domestic waste. Take it to a disposal facility.
EN
31