Wolf Garten Lycos 40/370 M Mode D'emploi page 27

Masquer les pouces Voir aussi pour Lycos 40/370 M:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
Operation
Adjusting the cutting height (Fig.
Risk of injuries due to the rotating mower
blade.
Only adjust the lawnmower with the
motor switched o and the mower blade
at a standstill.
Switch the motor o .
SAFETY ROUTINE
Switch the motor o .
Open the cover
Turn the safety key anti-clockwise until it reaches
position "0"
.
Press the power pack release
Put the power pack into position 1
storage and transport.
Close the cover
Pull the lever out slightly
Set the desired cutting height
Release the lever again
Note (cutting height – grass condition)
hene er possible, to protect the turf of the
lawn, onl mow the grass when it is thor-
oughl dr .
Set a cutting height of
hen cutting damp or long grass mow with
a higher cutting height.
Switching the lawnmower on/off (Fig.
Risk of injuries due to the rotating mower
blade.
Do not switch the lawnmower on if you
are standing in front of the grass ejector
opening!
Only switch the lawnmower on when it is
on a level surface.
Attention!
Do not switch the lawnmower on in long grass -
if necessary raise it slightly, as shown in
Switching the motor on (Fig.
Insert the power pack.
Press and hold the button
Pull the operator presence control
Release the button
)
DANGER!
.
.
for
.
.
.
.
mm.
CAUTION!
)
.
in.
.
Switching the motor o (Fig.
Release the operator presence control
Open the cover
Turn the safety key anti-clockwise until it reaches
position "0"
Press the power pack release
Put the power pack into position 1
storage and transport.
Close the cover
Activating the cut/collect function
(Fig.
Risk of injuries due to the rotating mower
blade.
Only adjust the lawnmower with the
motor switched o and the mower blade
at a standstill.
Switch the motor o .
Switch the motor o .
)
Open the cover
Turn the safety key anti-clockwise until it reaches
position "0"
Press the power pack release
Put the power pack into position 1
storage and transport.
Close the cover
Turn the switch to cut-collect
Raise the de ector ap
Hook the grass collector on
Lower the de ector ap again
.
SAFETY ROUTINE
.
.
.
)
DANGER!
The lawnmower is equipped with a
changeover switch (cut-collect/mulch). .
Use this switch to choose between the
functions cut-collect and mulching for
your lawn care.
SAFETY ROUTINE
.
.
.
.
EN
)
.
.
for
.
for
.
.
.
27

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lycos 40/400 m

Table des Matières