Angelo Po 1G1FA0GV Manuel D'utilisation Et D'installation page 42

To carry out this operation, proceed as follows.
1 - Remove the burner cap (A) and the burner (B).
2 - Clean the burner and the flame cap thoroughly
and check that the holes in it are not blocked.
3 - Clean the ignition slot in the burner regularly.
4 - Clean the hob.
5 - After use, clean the accessories with a suitable
grease-remover product. If possible, wash in
the dishwasher.
6 - Dry the surfaces and reassemble the compo-
nents.
Caution - warning
Never pour water or allow dirt to fall into the
burner as this will cause the burner to mal-
function or block the nozzle.
To carry out this operation, proceed as fol-
lows.
1 - Remove the bottom plate (C) and the grid
(D) from the oven and clean them thor-
oughly.
2 - Clean the inside parts of the oven to re-
move any deposits which may impair its opera-
tion.
3 - Dry the surfaces and reassemble the compo-
IT IT
nents.
GB GB
DE DE
To carry out this operation, proceed as follows.
FR 1 - Turn off the gas supply tap.
FR
ES ES
English
CLEANING THE HOB, BURNERS AND ACCESSORIES
CLEANING OVEN
CHECKING GAS PRESSURE
A
D
C
2 - Pull off the knob (A).
3 - Undo the screws (C) and remove the control
B
C
- 14 -
A
B
E
D
F
IDM-39603609400.tif
IDM-39618300600.tif
IDM-39618300700.tif