Maintenance And Cleaning; Service Centre; Warranty - Parkside PSR 310 A1 Instructions D'utilisation Et Consignes De Sécurité

Operation / Maintenance and Cleaning / Service centre / Warranty
Grinding
Switch on the power tool, apply the entire sand-
ing surface to the surface to be worked, and
move it across the work piece using moderate
pressure.
Be sure to apply pressure evenly to extend the
life of the grinding tools.
Increasing the application pressure excessively
will not yield high sanding performance but high-
er wear of the power tool and the grinding tools.
Do not use a grinding tool which has been used
for metal for other materials.

Maintenance and Cleaning

RISK OF INJURY!
Switch the device off and pull the plug out of the
mains socket before carrying out any work on the
device.
Do not use sharp objects to clean the device. Do
not allow any liquids to enter the device. Ignor-
ing this advice may damage the device.
Always have carbon brushes replaced by ser-
vice or an authorised specialist workshop. The
device is maintenance free other than this.
Clean the device regularly, preferably always
immediately after finishing work.
Use a dry cloth to clean the housing. Under no
circumstances should you use petrol, solvent or
cleaners which attack plastic.
You will need a vacuum to deep clean the device.
Vents must always be clear.
Use a brush to remove dust clinging to the device.

Service centre

Q
repaired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
lead needs to be replaced, always have
the replacement carried out by the
manufacturer or its service centre. This
will ensure that your device remains safe to use.
Have your device
If the plug or mains
Note: Spare parts not listed (e.g. carbon brushes,
switches) can be ordered through our call centre.
Additional flap discs and grinding rollers are avail-
able at specialist stores.

Warranty

The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tampering
not carried out by our authorized service branch. Your
statutory rights are not restricted in any way by this
warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
the purchase date. Repairs made after the expiration
of the warranty period are subject to payment.
GB
Service Great Britain
Tel.: 0871 5000 720
(0.10 GBP / Min.)
e-mail: kompernass@lidl.co.uk
IAN 271263
GB 49