Warranty Handling; Warranty Exclusions; Returning Defect Warranty Units - Topcom BPM Wrist 2301b Mode D'emploi

Topcom BPM 2301b

13.2 Warranty handling

If the unit develops a fault during the warranty period, Topcom or its
officially appointed service centre will repair any defects caused by
material or manufacturing faults free of charge.
Topcom will at its discretion fulfil its warranty obligations by either
repairing or exchanging the faulty units or parts of the faulty units. In
case of replacement, colour and model can be different from the
original purchased unit.
The initial purchase date shall determine the start of the warranty
period. The warranty period is not extended if the unit is exchanged or
repaired by Topcom or its appointed service centres.

13.3 Warranty exclusions

Damage or defects caused by incorrect treatment or operation and
damage resulting from use of non-original parts or accessories not
recommended by Topcom are not covered by the warranty. The
warranty does not cover damage caused by outside factors, such as
lightning, water and fire, nor any damage caused during transportation.
No warranty can be claimed if the serial number on the units has been
changed, removed or rendered illegible.

13.4 Returning defect warranty units

In case of defect, return the unit to the shop with a valid purchase note.
The CE symbol indicates that the unit complies with the essential
requirements of the directive 93/42/EEC and 89/336/EEC.
64