Power On And Off The Device; Pin Code Request - Resonance R16M Mode D'emploi

3.1 Power on and off the device

To turn on the device, press briefly the Main switch (6) and wait for the Pin code request on the display.
To switch off the device, press the Main switch (6) for about 2 ''and then release the button.
Before powering on the device, ensure that all the accessories are already plugged-in.

3.2 PIN Code request

When switching the device on a PIN code is requested to access both the device functionalities and
the data it contains. The default PIN code set by the manufacturer is 1234. After the PIN code has been
typed in the starting screen is presented. The PIN code can be changed or disabled through the
dedicated function available in the setup menu. For additional details see chapter 5.1
In case wrong codes are typed in, after 3 failures the possibility of new attempts is prevented and
unlocking is only possible with the PUK code provided along with the device. Should the PUK code
be lost, it can be retrieved by communicating to the manufacturer the device serial and product
numbers to be found on the label on the lower side of the unit.
R16M User's Manual – Page 88