Resonance R16M Mode D'emploi page 139

Number of probe:
Acquisition
TEOAE
Stimulus level:
Stimulus frequency:
Stimulus type:
Measurement interval:
Bandwidth:
Artefact noise level:
Protocols:
Pass stop criterion:
Max test time
Pass stop criterion:
Frequenze
indagine
F2/F1 frequency ratio
Reference frequency:
Stimulus level L2:
Stimulus level L1:
Artefact noise level:
Detection criterion:
Stop criterion:
Test time
frequency:
Protocols:
Technical descriptions more detailed and complete as wiring diagrams, parts list, instructions for calibration
and other materials necessary for the repair and maintenance of the instrument, are contained in the service
manual which will be provided, upon request, technical personnel authorized by the manufacturer to carry
out such operations
Otoacoustic Emission
1
24 bit 44.1 Ksps
70 ÷ 90 dB peSPL
66 Hz
Non- linear Click
512 samples, da 5 a 15 msec.
from 750 Hz to 5KHz
from 20 to 60 dB SPL
3, user's definable
Statistical analysis of the signal polarity
from 500 to 1250 stimuli (from 30 to 75 sec)
signal/noise ratio3, 6 or 9 dB definable for 3, 4 or 5 frequencies.
di 1, 1.5, 2, 3, 4 Khz
1.22
F2, from 1.5 to 12 kHz, 15 frequencies Max, user's definable
from 35 to 70 dB SPL step size 5 dB
User's definible: automatic (L1=0,4* L2+39 dB), L1=L2, L1=L2+ 10 dB
from 20 to 60 dB SPL
Signal noise ratio 3, 6 o 9 dB frequency definable
pass frequency number: from 2 to the number of enabled frequencies
per automatic or user definable, 2 to 16 sec
2 fixed (70 dB and 65-55 dB), 3 user's definable
R16M User's Manual – Page 139
TEOAE Screening
TEOAE Diagnostic
DPOAE