Resonance R16M Mode D'emploi page 129

Attention, battery is running low. Connect
the device to its medical power supply to
recharge and continue the test.
The noise level is too high for the test to be
performed. Check
positioning and/or the selected noise level
in the Setup menu.
An error occurred while reading the probe
data. Check the probe connector.
the probe correct
R16M User's Manual – Page 129
Delete the selected point?
The connected probe has no serial number.
You need to confirm whether you want it to
be permanently coupled to this specific
device
The connected probe is not suitable for the
selected test. The probe needs to be replaced
with the correct one.